Molecular Devices MultiWash+ User Manual page 41

Defining the Liquid Volume for the Prime or Rinse Process
Define the volume of liquid to dispense during the automatic prime or rinse process.
Figure 4-13: The Volume prompt
Table 4-9: Actions of Control Panel Buttons
Button
On the left
On the right
5032022 C
Action
Press this button to end the process and return to Prime/Rinse. See
Rinsing the Fluidics System on page
The button has no function for this option.
Press this button to increase the dispense volume by 1 mL, up to a maximum of
200 mL.
Press this button to decrease the dispense volume by 1 mL, down to a minimum of
1 mL.
Press this button to confirm the dispense volume and start the automatic prime or
rinse process. See Starting the Automatic Prime or Rinse Process on page
Chapter 4: Priming or Rinsing the Fluidics System
31.
Priming or
42.
41