Molecular Devices MultiWash+ User Manual page 42

MicroWash+ Microplate Washer User Guide
Starting the Automatic Prime or Rinse Process
After the instrument is prepared, the automatic prime or rinse process can be run.
Figure 4-14: The Start Prime/Rinse prompt
Table 4-10: Actions of Control Panel Buttons
Button
On the left
On the right
Figure 4-15: The Prime/Rinse In Process prompt
To stop the prime or rinse process, press the
42
Action
Press this button to end the process and return to Prime/Rinse. See
Rinsing the Fluidics System on page
The button has no function for this option.
The button has no function for this option.
The button has no function for this option.
Press this button to run the automatic prime or rinse process.
31.
button on the left.
Priming or
5032022 C