Table of Contents
Advertisement
MicroWash+ Microplate Washer User Guide
Running the Selected Procedure
After you have selected the procedure to run, the software displays a series of optional
prompts to make sure that the instrument is ready for the procedure.
The software displays the optional prompts in the following order:
1.
Confirm the Level of the Wash Bottle, see page 27
2.
Confirm the Level of the Waste Bottle, see page 28
3.
Confirm That the Microplate is Loaded, see page 29
4.
Define the Number of Strips to Process, see page 30
If no options have been enabled, then the selected procedure starts to run. See
the Procedure on page
26
Note: Before starting a procedure, make sure that the applicable wash and rinse
bottles contain adequate liquid, and that the waste bottle is empty.
30.
Monitoring
5032022 C
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the MultiWash+ and is the answer not in the manual?
Questions and answers