Select The Well Shape Of The Microplate Type - Molecular Devices MultiWash+ User Manual

MicroWash+ Microplate Washer User Guide

Select the Well Shape of the Microplate Type

Different options are available for round-bottom and flat-bottom microplates. To define a
flat-bottom microplate type, see
Figure 7-6: The Well Shape prompt
Table 7-7: Actions of Control Panel Buttons
Button
On the left
On the right
84
Defining a Flat-Bottom Microplate Type on page
Action
Press this button to return to the previous step. See
Microplate Type on page
Press this button to end the process and return to Define Plate without saving any
changes. See Defining a Microplate Type on page
Press this button to display either Flat or Round. To define a round-bottom
microplate type, select Round.
Press this button to display either Flat or Round. To define a round-bottom
microplate type, select Round.
Press this button to confirm the well shape and then define the center of the well for
aspiration for the microplate type. See
on page 85.
83.
77.
Define the Center of the Well for Aspiration
95.
Select the Format of the
5032022 C