Defining The Procedure - Molecular Devices MultiWash+ User Manual

MicroWash+ Microplate Washer User Guide

Defining the Procedure

The defined procedure can have up to eight previously defined cycles and one previously
defined microplate type. If you have not defined the cycles and microplate type to use with
this procedure, you must do so before you can continue with the procedure definition.
To define the wash or rinse cycles, see
To define the microplate type, see
The software displays the prompts for the procedure definition in the following order:
1. Confirm or Change the Name of the Procedure, see page 53
2. Select the Bottle for the Procedure, see page 55
3. Select the Cycles for the Procedure, see page 56
4. Select the Duration of the Final Aspiration for the Procedure, see page 58
5. Select the Speed of the Final Aspiration for the Procedure, see page 59
6. Select the Processing Mode for the Procedure, see page 60
7. Select the Microplate Type for the Procedure, see page 61
8. Enable the Number of Strips Prompt for the Procedure, see page 62
9. Delay the Final Aspiration for Strips in the Procedure, see page 63
52
Defining a Wash or Rinse Cycle on page
Defining a Microplate Type on page
65.
77.
5032022 C