Define The Dispense Volume For The Cycle - Molecular Devices MultiWash+ User Manual

Define the Dispense Volume for the Cycle

Define the dispense volume in the cycle from 0 µL to 2000 µL.
Figure 6-6: The Dispense Volume prompt
Table 6-6: Actions of Control Panel Buttons
Button
On the left
On the right
5032022 C
Action
Press this button to return to the previous step. See
Aspiration for the Cycle on page
Press this button to end the process and return to Define Cycle without saving any
changes. See Defining a Wash or Rinse Cycle on page
Press this button to add volume in 50 µL increments to a maximum of 2000 µL.
Press this button to subtract volume in 50 µL increments to a minimum of 0 µL.
Press this button to confirm the volume and then define the speed of the dispense
for the cycle. See Select the Dispense Speed for the Cycle on page
Chapter 6: Defining a Wash or Rinse Cycle
Select the Speed of the
70.
65.
72.
71