Molecular Devices MultiWash+ User Manual page 117

Scrolling Through the Detection Options
Liquid-level detection is not available for the instrument. To prevent messages, make sure
that Off is selected for each of the following options.
Figure 8-5: The Waste Full Detection option
Press
Figure 8-6: The Rinse Empty Detection option
Press
Figure 8-7: The Wash1 Empty Detection option
Press
Figure 8-8: The Wash2 Empty Detection option
Press
Figure 8-9: The Wash3 Empty Detection option
Press
Liquid Level Warning on page
5032022 C
to go to the Rinse Empty Detection option.
to go to the Wash1 Empty Detection option.
to go to the Wash2 Empty Detection option.
to go to the Wash2 Empty Detection option.
to set the liquid level warning message. See
118.
Chapter 8: Selecting Instrument Set Up Options
Selecting the Display of the
117