Select The Cycles For The Procedure - Molecular Devices MultiWash+ User Manual

MicroWash+ Microplate Washer User Guide

Select the Cycles for the Procedure

The procedure definition must have at least one cycle selected, and can have up to eight
cycles. If you have not defined the cycles to use with this procedure, you must do so before
you can continue with the procedure definition. See
65.
Figure 5-6: The Cycle1 prompt
Table 5-5: Actions of Control Panel Buttons
Button
On the left
On the right
56
Action
Press this button to return to the previous step. See
Procedure on page 55.
Press this button to end the process and return to Define Procedure without saving
any changes. See Defining a Procedure on page
Press this button to scroll forward through the list of previously defined cycles.
Press this button to scroll backward through the list of previously defined cycles.
Press this button to confirm the cycle selection and then select the next cycle to use
with the procedure. See Add More Cycles to the Procedure on page
Defining a Wash or Rinse Cycle on page
Select the Bottle for the
51.
57.
5032022 C