Defining The Interval Between Each Prime Or Rinse Process - Molecular Devices MultiWash+ User Manual

MicroWash+ Microplate Washer User Guide

Defining the Interval Between Each Prime or Rinse Process

Define the number of minutes to wait before running each periodic prime or rinse process.
The defined prime or rinse process repeats after the defined interval of time until the process
is stopped.
Figure 4-22: The Rinse Interval prompt
Table 4-15: Actions of Control Panel Buttons
Button
On the left
On the right
48
Action
Press this button to end the process and return to Prime/Rinse. See
Rinsing the Fluidics System on page
The button has no function for this option.
Press this button to increase the interval by 1 minute, up to a maximum of
200 minutes.
Press this button to decrease the interval by 1 minute, down to a minimum of
1 minute.
Press this button to confirm the interval and start the periodic prime or rinse
process. See Starting the Periodic Prime or Rinse Process on page
31.
Priming or
49.
5032022 C