Table of Contents
Advertisement
MicroWash+ Microplate Washer User Guide
Defining the Cycle
One or more defined cycles are required before a procedure can be defined.
The software displays the prompts for the cycle definition in the following order:
1.
Confirm or Change the Name of the Cycle, see page 67
2.
Select the Duration of the Aspiration for the Cycle, see page 69
3.
Select the Speed of the Aspiration for the Cycle, see page 70
4.
Define the Dispense Volume for the Cycle, see page 71
5.
Select the Dispense Speed for the Cycle, see page 72
6.
Select the Wash Mode for the Cycle, see page 73
7.
Define the Microplate Shake Time for the Cycle, see page 74
8.
Select the Microplate Shake Intensity for the Cycle, see page 75
9.
Define the Minimum Soak Time for the Cycle, see page 76
66
5032022 C
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the MultiWash+ and is the answer not in the manual?
Questions and answers