Molecular Devices MultiWash+ User Manual page 27

Confirm the Level of the Wash Bottle
If the Liquid Warning option is enabled in the Setup menu, then the software displays a
prompt to make sure that the applicable wash bottles have sufficient liquid for the selected
procedure.
CAUTION! Running a procedure without sufficient liquid in the wash bottles can
damage the instrument.
To enable the Liquid Warning option in the Setup menu, see
Options on page
Figure 3-2: The Wash Liquid OK prompt
Table 3-2: Actions of Control Panel Buttons
Button
On the left
On the right
5032022 C
113.
Action
If the wash bottle does not contain enough liquid, press this button to return to Run
Procedure. See Running a Procedure on page
If the wash bottle contains enough liquid, press this button to go to the next step. If no
other options have been enabled, then the selected procedure starts to run. See
Monitoring the Procedure on page
The button has no function for this option.
The button has no function for this option.
The button has no function for this option.
Chapter 3: Running a Procedure
Selecting Instrument Set Up
25.
30.
27