Select The Microplate Type For The Procedure - Molecular Devices MultiWash+ User Manual

Select the Microplate Type for the Procedure

Select a previously defined microplate type for the procedure. If you have not defined the
microplate type to use with this procedure, you must do so before you can continue with
the procedure definition. See
Figure 5-11: The Plate prompt
Table 5-10: Actions of Control Panel Buttons
Button
On the left
On the right
5032022 C
Defining a Microplate Type on page
Action
Press this button to return to the previous step. See
the Procedure on page 60.
Press this button to end the process and return to Define Procedure without saving
any changes. See Defining a Procedure on page
Press this button to scroll forward through the list of previously defined microplate
types.
Press this button to scroll backward through the list of previously defined microplate
types.
Press this button to confirm the microplate type and then select whether to ask for
the number of strips in the procedure set up. See
Prompt for the Procedure on page
Chapter 5: Defining a Procedure
77.
Select the Processing Mode for
51.
Enable the Number of Strips
62.
61