Molecular Devices MultiWash+ User Manual page 49

Starting the Periodic Prime or Rinse Process
After the instrument is prepared, the periodic prime or rinse process can be run.
Figure 4-23: The Start Prime/Rinse prompt
Table 4-16: Actions of Control Panel Buttons
Button
On the left
On the right
Figure 4-24: The Periodic Rinse prompt
The defined prime or rinse process repeats after the defined interval of time until the process
is stopped.
To stop the prime or rinse process, press the
5032022 C
Action
Press this button to end the process and return to Prime/Rinse. See
Rinsing the Fluidics System on page
The button has no function for this option.
The button has no function for this option.
The button has no function for this option.
Press this button to run the periodic prime or rinse process.
Chapter 4: Priming or Rinsing the Fluidics System
31.
button on the left.
Priming or
49