Check Engine Coolant Level, Clean Radiator And Oil Cooler - Volvo Ingersoll Rand SD-116 TF Series Operator's Manual

SECTION 5

Check Engine Coolant Level, Clean Radiator and Oil Cooler

Injury can occur when removing the radiator cap.
Steam or fluid escaping from the radiator can burn. Rust inhibitor
contains alkali, avoid contact with skin and eyes.
Always shut down the engine and allow it to cool down before removing
the radiator cap. Remove cap slowly to relieve pressure. Avoid contact
with steam or escaping fluid.
1. Check engine coolant level by observing the level in the coolant recovery bottle
(1, Figure 5-17). Coolant level should be at the "COLD" level mark if the engine
is cold or at the "HOT" level if the engine is at operating temperature. If
required, add a 50-50 mixture of anti-freeze and water to bring coolant to the
proper level.
2. Check for signs of clogging of exposed cooling fins on the radiator (1, Figure 5-
18) and oil cooler (2).
5-20
Figure 5-17
WARNING
!
SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX
MAINTENANCE INSTRUCTIONS