Iso Metric Torque Chart - Volvo Ingersoll Rand SD-116 TF Series Operator's Manual

TORQUE SPECIFICATIONS
All thread fasteners will have Loctite™ applied, except the following:
1. Nylon insert nuts
2. Whizlock bolts and nuts
3. Fasteners less than 1/4-inch diameter,
4. If specifically instructed not to apply Loctite™

ISO METRIC TORQUE CHART

Use the following Recommended Torque Chart for bolts and nuts of ISO Metric strength Class
8.8 or better. If other torques are required, they will be indicated in the text.
NOTE: Use Loctite™ 271 on all bolts larger than M8.
NOTE: Use Loctite™ 242 on M8 bolts and smaller. Apply enough Loctite™ to
fill all gaps between the engaged bolt and nut threads.
All thread fasteners will have Loctite™ applied, except the following:
1. Nylon insert nuts
2. Whizlock bolts and nuts
3. Fasteners less than 1/4-inch diameter,
4. If specifically instructed not to apply Loctite™
SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX
Table 2:
Bolt Size
Lbs/Ft.
M6 x 1,0 9
M8 x 1,25 21
M10 x 1,5 45
M12 x 1,75 79
M14 x 2,0 125
M16 x 2,0 195
M20 x 2,5 380
M24 x 3,0 660
M30 x 3,5 1310
M36 x 4,0 2290
Torque
N•m<
12
28
61
105
170
265
515
895
1780
3100
SECTION 9
9-3