Check Drum Scraper Setting; Check Seat Belt - Volvo Ingersoll Rand SD-116 TF Series Operator's Manual

SECTION 5

Check Drum Scraper Setting

1. Check drum scraper (2, Figure 5-29) to insure there is no damage and that it is
adjusted correctly.
2. Adjustment is made with the hardware and shims located on the scraper bar
assembly. Do not allow the scraper drum clearance to be less than 20 mm
(0.79 in) or more than 25 mm (0.98 in).

Check Seat Belt

CHECK the seat belt regularly for wear or damage. Inspect belt hardware and fabric. Replace
if hardware is damaged or if strap is nicked, frayed or loose sticking is found. Seat belt
assemblies should be replaced every 3 years regardless of appearance. Seat belt strength
degrades over time and use due to exposure to weather, UV (ultraviolet radiation) and
abrasives (dirt). Check that mounting hardware is tight.
5-30
MAINTENANCE INSTRUCTIONS
SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX