Volvo Ingersoll Rand SD-116 TF Series Operator's Manual page 70

SECTION 4
Any machine defects must be corrected before operating the machine.
Checks and verifications of machine controls must be performed prior to
operating the machine.
1. Mount the compactor maintaining a three-point contact as shown in Figure 4-7
below.
NOTE: The machine contains a circuit that will allow machine to start only if the
propulsion control (19, Figure 4-7) is in neutral, the brakes are applied, and the
Emergency Stop (20) switch is reset.
2. Securely fasten seat belt across hips
4-6
Figure 4-6
CAUTION
!
Figure 4-7
SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX
OPERATING INSTRUCTIONS