Volvo Ingersoll Rand SD-116 TF Series Operator's Manual page 163

MAINTENANCE INSTRUCTIONS
1. Allow carrier oil to reach operating temperature and park the machine on a level
surface, shut off engine and apply brake.
2. Remove fill breather plug (1, Figure 5-76).
3. Place a container under drain plug (1, Figure 5-77).
4. Remove drain plug and allow carrier to drain.
5. Clean and replace drain plug.
6. Remove level check plug (2, Figure 5-77).
7. Add oil until oil runs out of level/check plug mounting hole. Refer to Section 8
for lubricant instructions.
8. Replace level/check plug.
9. Clean in solvent, dry and replace fill / breather plug.
10. Wipe up any excess oil.
SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX
Figure 5-76
Figure 5-77
SECTION 5
5-65