MAINTENANCE INSTRUCTIONS
6. Clean, insert and tighten plug.
7. Wipe up any excess oil.
Check Carrier Oil Level
1. Park the machine on a level surface and shut off engine.
2. Allow carrier to cool if necessary.
3. Clean around level check plug (1, Figure 5-37} on the lower side of the carrier
and remove. Drain plug (2) is located at 6 o'clock.
4. Check oil level. Oil should be level with the bottom of level check plug hole (1,
Figure 5-37).
5. If necessary, remove breather (1, Figure 5-38) and add oil until oil runs out of
hole (1, Figure 5-37). Refer to Section 8 for oil specifications.
6. Clean, insert and tighten level plug.
SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX
Figure 5-37
Figure 5-38
SECTION 5
5-37