Volvo Ingersoll Rand SD-116 TF Series Operator's Manual page 68

SECTION 4
7. Check fuel level gauge (7, Figure 4-2). If required, add clean, filtered fuel
through the fill area (1, Figure 4-3). Use only #2 diesel fuel.
8. Check engine oil level on dipstick (1, Figure 4-4). If required, add motor oil
through fill area (2, Figure 4-4 for Tier II engines; 1, Figure 4-4 for Tier III
engines) to bring to Full level on dipstick. Refer to the Section 8 for lube oil type.
If no oil is showing on the dipstick, call for service assistance to investigate the
cause of oil loss.
4-4
Figure 4-2
Figure 4-3
SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX
OPERATING INSTRUCTIONS