Volvo Ingersoll Rand SD-116 TF Series Operator's Manual page 84

SECTION 4
4. Torque all four ROPS support bolts to 895 N·m (660 lb-ft).
5. Disconnect jack (3, Figure 4-25) from clevis plate (4) by removing clip (6) and
pin (5).
6. Reposition jack to mounting lug (7, Figure 4-25) and attach with pin (5) and clip
(6).
4-20
Figure 4-24
Figure 4-25
SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX
OPERATING INSTRUCTIONS