Starting Engine - Volvo EC60E Operator's Manual

Operating instructions
148

Starting engine

A
0
B
A Engine speed control switch
B Ignition switch
Off position (0)
Radio position (R)
Operating (preheating) position (1)
Start position (2)
Starting engine
NOTE!
Make sure the control lockout lever is in locked
position, otherwise the engine can not be started.
Risk of fatal accidents.
Unauthorised persons within the work area around
the machine could lead to serious crushing injury.
• Clear all unauthorised personnel from the working
R
area.
1
• Keep a lookout in all directions.
• Do not touch control levers or switches during
start.
2
• Sound the horn before beginning operation.
NOTICE
V1158743
Do not keep the ignition switch in starting position
for more than 20 seconds, as this may seriously
damage the starting system. If the engine does not
start, turn the switch back to stop position and wait
a couple of minutes before the next starting attempt.
NOTICE
If the engine sounds or runs strangely or if strong
vibrations arise, the ignition switch must be turned
to stop position immediately.
NOTICE
Wait until the electronic system is completely shut
down before restarting.
1 Turn the engine speed control switch (A) to the
2 Sound the horn and let other workers and
3 Turn the key to the start position.
4 Release the key when the engine has started.
5 Warm up the machine.
WARNING
low speed position and turn the key to operating
position.
bystanders know you are starting the machine.
For the startup sequence, see page
45 .