Volvo Ingersoll Rand SD-116 TF Series Operator's Manual page 117

MAINTENANCE INSTRUCTIONS
4. Remove the dipstick and observe oil level. The oil level must be between the
full - top mark and low-bottom mark.
5. If oil level is low, add oil through the fill area (2, Figure 5-15 for Tier 2 engines;
1, Figure 5-16 for Tier 3 engines) to bring oil to the proper level. Refer to Section
8 for oil specifications.
6. Start engine, allow to run for one minute and recheck oil level. Add oil as
necessary.
SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX
Figure 5-15
Figure 5-16
SECTION 5
5-19