Volvo Ingersoll Rand SD-116 TF Series Operator's Manual page 93

OPERATING INSTRUCTIONS
7. Press and rotate the knob on valve (1, Figure 4-34) ninety degrees until you feel
it pop out.
8. Pull and rotate the knob on the valve (3, Figure 4-34) 90 degrees until you feel
the knob drop into retracted detent.
9. Using the hand pump (1, Figure 4-35) pressurize the system to 24 bar (350 psi),
registered on the gauge, to release the brakes.
10. Raise the operator's platform per instructions on Page 4-17 to gain access to
SD-116 and SD-122 propulsion pump (1, Figure 4-36) and multi-function
valves (2). The propulsion pump shown in Figure 4-37 is supplied on the SD-
160, SD-190, and the SD-200. The procedures are similar.
SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX
Figure 4-34
Figure 4-35
SECTION 4
4-29