Volvo Ingersoll Rand SD-116 TF Series Operator's Manual page 71

OPERATING INSTRUCTIONS
3. Move the FSR propulsion control
(center) position
4. Check that the E-stop switch
5. Place engine speed control switch (13, Figure 4-9) to Low idle position.
6. Apply parking brake by placing the parking park brake switch (15, Figure 4-9)
in the On position.
7. Turn ignition switch (12, Figure 4-10) to the ON / RUN position and verify that
the following occurs:
a. The park brake switch
b. The control console (Alternator Not Charging) light turns On.
SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX
(19, Figure 4-8) to the STOP
(20, Figure 4-8) is pulled up.
Figure 4-8
Figure 4-9
(15, Figure 4-10) indicator light turns On.
SECTION 4
4-7