SECTION 5
5. Clean the gasket surface of the filter head.
6. Apply a film of motor oil to the gasket sealing area. Refer to Section 8.
7. Fill the filter with new motor oil. Refer to Section 8 for oil specifications.
8. Install the filter as specified by filter manufacturer. Mechanical overtightening
may distort the threads or damage the filter element seat.
9. Clean drain plug, install and torque to 80 N-m (59 lb-ft).
10. Tier 3 Engines: Remove the dipstick (1, Figure 5-54).
11. All Engines: Fill crankcase with motor oil through the fill area (2, Figure 5-55 for
Tier 2 engines; 1, Figure 5-54 for Tier 3 engines) until the dipstick (1, Figure 5-
54, Figure 5-55) shows full. Refer to Section 8 for oil specifications.
5-46
MAINTENANCE INSTRUCTIONS
Figure 5-53
Figure 5-54
SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX