Check Condition Of Drum And Clean - Volvo Ingersoll Rand SD-116 TF Series Operator's Manual

MAINTENANCE INSTRUCTIONS
5. Move the propulsion control to NEUTRAL.
6. Release the parking brake test switch.
7. Shut down the engine and apply parking brake.
If the parking brake is working correctly the machine will not move. If the parking brake is not
working correctly and movement is observed, contact service personnel immediately and do
not use machine until corrected.

Check Condition of Drum and Clean

1. Park the machine on a level surface and turn off the engine.
2. Perform a visual inspection of the drum assembly (1, Figure 5-29) and remove
all adhering materials.
SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX
Figure 5-28
Figure 5-29
SECTION 5
5-29