Identification Data - Volvo Ingersoll Rand SD-116 TF Series Operator's Manual

INTRODUCTION
Always keep the Operation and Maintenance Manual on the machine and within reach of the
operating position.
If any part of this manual cannot be understood, contact your supervisor or local Ingersoll
Rand Distributor. This is an essential condition for working safely with this machine.
The correct machine operation, use and regular maintenance are also essential elements to
provide the highest performance and safety.
The present manual is accompanied with an engine instruction manual. You are therefore
advised to follow the operation and maintenance instructions as specified in both the engine
and the machine instruction manuals.
Some illustrations in this manual may show machines with optional equipment installed. This
optional equipment maybe purchased from your local Ingersoll Rand Road Machinery
Equipment Distributor.
Each manual is reviewed and revised regularly to include all necessary changes. Ingersoll
Rand reserves the right to modify or make changes within a specific model group without
notice, and without incurring any liability to retrofit machines previously shipped from the
factory. Contact your Ingersoll Rand Road Machinery Equipment Distributor for non-routine
maintenance that is not covered in this manual.

IDENTIFICATION DATA

An exact description of the model type and serial number of your machine will facilitate fast
and efficient response from our parts and service support operations.
Always provide the model of your machine and it's serial number when you contact the local
Ingersoll Rand service or parts office.
We advise you to enter your machine data in the following lines to maintain machine and
engine information:
Model............................
Serial No..................................
Year of manufacture..............
Engine Serial No. and type of engine..............................
SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX 3