Volvo Ingersoll Rand SD-116 TF Series Operator's Manual page 96

SECTION 4
.
4. Place a wrench on the middle size hex (3, Figure 4-38 or Figure 4-39) and a
second wrench on the large hex (4) to prevent cartridge rotation, rotate the
middle size hex three revolutions clockwise (CW) to close the bypass valve.
5. Lower the operator's platform.
6. Access the battery compartment.
7. Pull and rotate the knob on valve (3, Figure 4-40) 90 degrees from the retracted
detent position to the extended detent.
8. PRESS and twist the knob on valve (1, Figure 4-40) to return knob to lock
position.
9. Verify the emergency control is pulled up, turn the key to the ON position to
verify the brake is applied.
10. Check the parking brake using the procedures in Section 5 of this manual.
11. Locate the Warning Tag attached to the steering wheel.
4-32
Figure 4-39
Figure 4-40
SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX
OPERATING INSTRUCTIONS