OPERATING INSTRUCTIONS
TIER II ENGINES
9. Check hydraulic oil level at gauge (1, Figure 4-5). Add fresh, clean, anti-wear,
hydraulic oil through the fill area (2, Figure 4-5). Install the fill plug. Refer to
Section 8 for hydraulic oil specs.
10. Check wear condition of mounting pins and bushings on the steering cylinders
(1, Figure 4-6). Any wear in the pins and bushings should be noted and proper
personnel notified.
SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX
Figure 4-4
Figure 4-5
TIER III ENGINES
SECTION 4
4-5