Rops/Fops/Seat Belt - Volvo Ingersoll Rand SD-116 TF Series Operator's Manual

ROPS/FOPS/SEAT BELT

All Ingersoll Rand SD-TF Series compactors are supplied with a ROPS (Rollover Protection
Structure), FOPS (Falling Objects Protection Structure) and seat belt.
Use of the seat belt with the above will lessen the possibility of serious injury or death in the
event of a rollover.
Your life may be endangered if the following are not complied with:
DO NOT operate this machine if the Rollover Protection Structure (ROPS)
or Falling Objects Protection Structure (FOPS) is structurally damaged,
shows cracks, is not properly secured as originally installed, or has been
involved in a rollover.
DO NOT repair, modify, drill, weld on or add attachments to the ROPS/
FOPS unless authorized in writing by the manufacturer.
DO NOT operate the machine unless the seat belt conforming to SAE and/
or ASAE standards is fastened.
Contact your dealer for complete inspection requirements and
maintenance instructions.
SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX
WARNING
!
INTRODUCTION
9