Volvo Ingersoll Rand SD-116 TF Series Operator's Manual page 150

SECTION 5
5. Remove the bowl (4, Figure 5-60) and clean the O-ring gland.
6. Apply a coating of clean fuel or motor oil to the new O-ring and element (3,
Figure 5-60) seal.
7. Spin bowl (4, Figure 5-60) onto element (3).
8. Spin bowl and element assembly onto the filter head. Hand tighten. DO NOT
OVERTIGHTEN.
9. With vent plug (1, Figure 5-60) loosened, operate primer pump (5) until fuel
purges the vent plug (1).
10. Close vent plug (1, Figure 5-60), start the engine and check for leaks.
Change Fuel Filter SD-116, SD-122 TF 155 HP Electronic Engine, SD-122, SD-
160 TF 173 HP Mechanical Engine
Fuel is flammable. May cause severe injury or death.
Shut down the engine, extinguish all open flames and do not smoke while
filling the tank.
Always wipe up any spilled fuel.
1. Clean the area around the fuel filter (Figure 5-61).
5-52
WARNING
!
Figure 5-61
SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX
MAINTENANCE INSTRUCTIONS