Volvo Ingersoll Rand SD-116 TF Series Operator's Manual page 73

OPERATING INSTRUCTIONS
2. Place high/low engine speed control switch (13, Figure 4-12) to Low idle
position.
3. If applied, reset the emergency stop switch STOP (20, Figure 4-11) by pulling
upward on the switch. Engine will not crank if emergency stop switch is
depressed.
4. Be sure Park Brake switch
The engine will not crank if Park Brake is in the "Off" position.
SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX
Figure 4-11
Figure 4-12
(15, Figure 4-12) is in the "Applied" position.
SECTION 4
4-9