Grease Horizontal / Vertical Swivel Pins - Sd-116, -122 & -160 Tf - Volvo Ingersoll Rand SD-116 TF Series Operator's Manual

MAINTENANCE INSTRUCTIONS
5. If not, insert standpipe supplied with the machine through access hole (1,
Figure 5-43) and into spring-loaded cap. Add oil until oil runs out of level check
hole (2, Figure 5-43). Refer to Section 8 for lubrication information.
6. Clean, insert and tighten plug.
7. Wipe up any excess oil.
Grease Horizontal / Vertical Swivel Pins - SD-116, -122 & -160 TF.
1. Clean the vertical pin fittings (1, Figure 5-45) and horizontal swivel pin (2)
grease fittings.
2. Apply five shots of MPG-EP2 grease to each fitting.
SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX
Figure 5-44
Figure 5-45
SECTION 5
5-41