B&R Automation Panel 1000 User Manual page 76

Technical data
Model number
Interfaces
USB
Quantity
Type
Variant
Transfer rate
Current-carrying capacity
Keys
Function keys
System keys
Service life
LED intensity
Yellow
Operating conditions
Pollution degree per EN 61131-2
Degree of protection per EN 60529
Degree of protection per UL 50
Mechanical properties
Front
4)
Frame
Panel overlay
Material
Light background color
Dark border color around display
Gasket
Dimensions
Width
Height
Weight
1) Yes, but applies only if all components installed in the complete system have this certification and the complete system bears the corresponding mark.
2) At 25°C ambient temperature. Reducing the brightness by 50% can increase the half-brightness time by approximately 50%.
3) Touch screen drivers for approved operating systems are available for download in the Downloads section of the B&R website (www.br-automation.com).
4) Visual deviations in color and surface quality are possible due to process or batch conditions.
4.2.1.8.4 Dimensions
4.2.1.8.5 Requirements
10.4" AP1000 panels are supported starting with the following firmware versions:
• Firmware V03.11 or later with SDL/DVI receiver 5DLSDL.1001-00
• Firmware V04.08 or later with SDL3 receiver 5DLSD3.1001-00
76
Low speed (1.5 Mbit/s), full speed (12 Mbit/s) to high speed (480 Mbit/s)
>1,000,000 actuations at 1 ±0.3 N to 3 ±0.3 N actuating force
Back: IP20 (only with installed link module or installed system unit)
Table 18: 5AP1180.1043-000 - Technical data
323
Figure 34: 5AP1180.1043-000 - Dimensions
5AP1180.1043-000
1
USB 2.0
Type A
Max. 500 mA
22 with LED (yellow)
No
Typ. 38 mcd
Pollution degree 2
Front: IP65
Front: Type 4X indoor use only
Aluminum, naturally anodized
Polyester
RAL 9006
RAL 7024
3 mm fixed gasket
323 mm
260 mm
2800 g
Automation Panel 1000 user's manual V2.00