Control Center; Functions - B&R Automation Panel 1000 User Manual

7.4 Control Center

The Automation Device Interface (ADI) allows access to specific functions of B&R devices. The settings of these
devices can be read out and changed in Windows using the B&R Control Center in the Control Panel.
Information:
The displayed temperature and voltage values (e.g. CPU temperature, core voltage, battery voltage)
represent uncalibrated information values. No conclusions about possible alarms or hardware mal-
functions can be drawn from this. The hardware components used have automatic diagnostic func-
tions in the event of error.

7.4.1 Functions

Information:
The functions available in the Control Center depend on the device family.
• Changing display-specific parameters
• Reading out device-specific keys
• Updating the key configuration
• Testing keys or device-specific LEDs of a membrane keypad
• Reading out or calibrating control devices (e.g. key switch, handwheel, joystick, potentiometer)
• Reading out temperatures, fan speeds, switch positions and statistical data
• Reading out operating hours (power-on hours)
• Reading user settings and factory settings
• Reading software versions
• Updating and backing up BIOS and firmware
• Creating reports for the current system (support)
• Setting the SDL equalizer value for the SDL cable adjustment
• Changing the user serial ID
Depending on the version, a detailed description of the Control Center is available either in the integrated help
documentation or in the user documentation.
Automation Panel 1000 user's manual V2.00
Figure 71: B&R Control Center screenshots - Examples
Software
131