12.1" Devices - B&R Automation Panel 1000 User Manual

A.5.2.4 12.1" devices
The cutout tolerance for the PP100/200, PP300/400, PP500, AP900, PPC700 and PPC800 is ±0.5 mm.
The cutout tolerance for the AP1000 is +0 mm / -0.5 mm.
PP100/200/300/400
PP500
12.1" Automation Panel 1000, Automation Panel 900, Panel PC 700 and Power Panel 500 devices are not 100%
compatible with Power Panel 300/400 or Power Panel 100/200 devices in Landscape1 format. Power Panel
300/400 and Power Panel 100/200 devices need a cutout that is 1.5 mm wider (left and right).
The larger cutout can be used conditionally for all devices:
• During installation, it is important to ensure that the AP1000, AP900, PPC700 and PP500 devices are
positioned and installed as centrally as possible in the cutout.
Automation Panel 1000 user's manual V2.00
10 AP900, PPC700, PP500, AP1000
8.5 PP100/200/300/400
1.5
Outer contour of device
Cutout for PP100/200/300/400 device
Cutout for AP900/PPC700/PP500/AP1000 device
Figure 109: Installation compatibility - 12.1" devices - Landscape1
10 AP900, PPC700, PP500, AP1000
8.5 PP100/200/300/400
362 x 284
345 x 267
342 x 267
1.5
Appendix A
8.5
AP900/PPC700
AP1000
8.5
199