B&R Automation Panel 1000 User Manual page 156

Accessories
Model number
Test voltage
Wire/Wire
Wire/Shield
Wave impedance
Conductor resistance
24 AWG
26 AWG
Insulation resistance
Operating conditions
Pollution degree per EN 61131-2
Approbation
Flame-retardant
Oil and hydrolysis resistance
Ambient conditions
Temperature
Storage
Fixed installation
Flexible installation
Mechanical properties
Dimensions
Length
Diameter
Bend radius
Fixed installation
Flexible installation
Flexibility
Drag chain data
Flex cycles
Speed
Bend radius
Hub
Weight
Tension
In operation
During installation
Table 63: 5CASDL.0018-03, 5CASDL.0050-03, 5CASDL.0100-03, 5CASDL.0150-03,
5CASDL.0200-03, 5CASDL.0250-03, 5CASDL.0300-03 - Technical data
1) Yes, but applies only if all components installed in the complete system have this certification and the complete system bears the corresponding mark.
2) Yes, but applies only if all components installed in the complete system have this certification and are listed on the associated DNV GL certificate for the
product family.
9.4.4.1.4 Bend radius specification
Connector - Ferrite bead
156
5CASDL. 5CASDL.
0018-03 0050-03
1.8 m ±20 mm 5 m ±45 mm
≥15x cable diameter (from ferrite bead to ferrite bead)
Flexible, applies from ferrite bead to ferrite bead (tested 300000 cycles at 15x cable diameter, 4800 cycles/hour)
Approx. 460 g Approx. 1020 g Approx. 1940 g Approx. 2840 g Approx. 3740 g Approx. 4560 g Approx. 5590 g
Connector
Bend radius
Ferrite bead
Figure 83: Bend radius specification
5CASDL. 5CASDL.
0100-03 0150-03
1 kV
0.5 kV
100 ±10 Ω
≤95 Ω/km
≤145 Ω/km
>200 MΩ/km
Pollution degree 2
UL AWM 20236 80°C 30 V
Per UL 758 (cable vertical flame test)
Per VDE 0282-10
-20 to 80°C
-20 to 80°C
-5 to 60°C
10 m ±90 mm 15 m ±135 mm 20 m ±180 mm 25 m ±225 mm 30 m ±270 mm
Max. 12 mm
≥3.5x cable diameter
300,000
4800 cycles/hour
180 mm, 15x cable diameter
460 mm
≤50 N
≤400 N
Ferrite bead
Bend radius
Ferrite bead - Ferrite bead
Automation Panel 1000 user's manual V2.00
5CASDL. 5CASDL.
0200-03 0250-03
Ferrite bead
5CASDL.
0300-03