Sdl3 Operation - B&R Automation Panel 1000 User Manual

4.1.1.3 SDL3 operation

Smart Display Link 3 (SDL3) technology transfers all communication channels between a B&R industrial PC and
panel up to 100 m over a standard Ethernet cable (min. Cat 6a). An RJ45 connector is used for the device con-
nection, which is ideal for confined spaces in feed-throughs and swing arm systems.
4.1.1.3.1 SDL3 operation with SDL3 transmitter
In SDL3 operation with an SDL3 transmitter in the B&R industrial PC, all communication between the Automation
Panel and B&R industrial PC takes place via a single SDL3 cable.
In addition to the display data, information from the touch screen, matrix keys, LEDs and service/diagnostic data
is transferred. The Automation Panel can be installed up to 100 m away from the B&R industrial PC. USB 2.0 is
also transferred over this distance and fully integrated into SDL3. External adapter modules are not required.
The brightness of the display can be set via the ADI Control Center.
Availability of interfaces on Automation Panels with an SDL3 receiver:
✓
SDL3 interface USB1, USB2
Maximum cable length for SDL3: 100 m
Requirements
• Automation Panel with SDL3 receiver
• B&R industrial PC with SDL3 interface
• SDL3/SDL4 cable
4.1.1.3.2 General limitations/characteristics
• USB 2.0 transfer is limited to 30 Mbit/s with SDL3.
• A display is always emulated by the SDL3 transmitter using EDID data and hot plug detection, so DVI-
compatible operation is possible. For this reason, the following behavior may occur during operation with
multiple displays. In the operating system, a connected panel is reported by the video driver even in the
following situations:
° No SDL3/SDL4 cable is connected.
° There is no connection established yet between the SDL3 link module and SDL3 transmitter.
This behavior can be avoided by appropriate configuration in BIOS or via the graphics driver.
Automation Panel 1000 user's manual V2.00
Power supply (SELV/PELV)
Automation Panel
with SDL3 receiver
✓
USB 2.0 Power supply
SDL3 cable
B&R industrial PC
with SDL3 transmitter
✓
Grounding
Technical data
✓
21