B&R Automation Panel 1000 User Manual page 151

9.4.2.1.6 Cable pinout
Field-assembled cables must be created according to the following assignment.
Information:
Functionality is only guaranteed for the cables available from B&R.
Pin Pinout
1 TMDS data 2 negative
2 TMDS data 2 positive
3 Shielding TMDS data 2 and SDL
4 SDL negative
5 SDL positive
6 DDC data
7 DDC clock
8 Not connected
9 TMDS data 1 negative
10 TMDS data 1 positive
11 TMDS data 1 and XUSB0 shield
12 XUSB0 negative
Automation Panel 1000 user's manual V2.00
DVI (24+1), male
Cable shield
DVI (24+1), male
Cable shield
Pin Pinout
13 XUSB0 positive
14 +5 V
15 GND
16 Hot plug detection
17 TMDS data 0 negative
18 TMDS data 0 positive
19 Shielding TMDS data 0 and XUSB1
20 XUSB1 negative
21 XUSB1 positive
22 TMDS data shield
23 TMDS clock positive
24 TMDS clock negative
Accessories
151