International And National Certifications; Directives And Declarations; Ce Marking; Radio Equipment Directive (Red) - B&R Automation Panel 1000 User Manual

Table of Contents

Advertisement

10 International and national certifications

10.1 Directives and declarations

10.1.1 CE marking

10.1.2 Radio Equipment Directive (RED)

These products meet the requirements of EU directive "Radio Equipment Directive 2014/53/EU" and are designed
for industrial use:
Information:
The rear side of the device must be installed in an appropriate fire protection housing for operation
per EN 60950-1.
EN 61131-2:2007
EN 61000-6-2:2005
EN 61000-6-4:2007
EN 300 328 V2.1.1
EN 300 330 V2.1.1
EN 301 489-3 V2.1.1
EN 301 489-17 V3.1.1
EN 60950-1:2013
EN 62479:2010
EN 50364:2010
EN 62369-1:2010
Automation Panel 1000 user's manual V2.00
All directives applicable to the respective product and their harmonized EN standards
are met.
Programmable controllers - Part 2: Equipment requirements and tests
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for in-
dustrial environments
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission stan-
dard for industrial environments
Data transmission equipment operating in the 2.4 GHz ISM band and using wide band
modulation techniques
Short range devices (SRD) - Radio equipment in the frequency range 9 kHz to 25
MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz
Electromagnetic compatibility (EMC) standard for radio equipment and services - Part
3: Specific conditions for short-range devices (SRD) operating on frequencies be-
tween 9 kHz and 246 GHz
Electromagnetic compatibility (EMC) standard for radio equipment and services - Part
17: Specific conditions for broadband data transmission systems
Information technology equipment - Safety - Part 1: General requirements
Assessment of the compliance of low power electronic and electrical equipment with
the basic restrictions related to human exposure to electromagnetic fields (10 MHz
to 300 GHz)
Limitation of human exposure to electromagnetic fields from devices operating in the
frequency range 0 Hz to 300 GHz, used in electronic article surveillance (EAS), radio
frequency identification (RFID) and similar applications
Evaluation of human exposure to electromagnetic fields from short-range devices
(SRDs) in various applications over the frequency range 0 GHz to 300 GHz - Part 1:
Fields produced by devices used for electronic article surveillance, radio frequency
identification and similar systems
International and national certifications
175

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents