Rcm; Dnv Gl Certification - B&R Automation Panel 1000 User Manual

International and national certifications

10.2.4 RCM

10.2.5 DNV GL certification

Information:
The line filter 5AC804.MFLT-00 in the power supply line is mandatory for use in the maritime environ-
ment. For more information, see section
The following table lists the revisions from which DNV GL certification applies to individual components.
Model number Description
5AP1120.1906-000 Automation Panel 19.0" SXGA TFT 1280 x 1024 pixels (5:4) - Single-touch (analog resistive) - Control cabinet installa-
tion- Landscape format - Front USB interface - For PPC900 / PPC2100 / PPC3100 / link modules - Compatible with
5AP920.1906-01 / 5PC720.1906-00 / 5PC820.1906-00
5AP1130.156C-000 Automation Panel 15.6" Full HD TFT - 1920 x 1080 pixels (16:9) - Multi-touch (projected capacitive) - Control cabinet
installation - Landscape format - For PPC900 / PPC2100 / PPC3100 / link modules
5CADVI.0018-00 DVI-D cable - 1.8 m
5CADVI.0050-00 DVI-D cable - 5 m
5CADVI.0100-00 DVI-D cable - 10 m
5CASDL.0008-00 SDL cable - 0.8 m
5CASDL.0010-03 SDL flex cable - 1 m
5CASDL.0018-00 SDL cable - 1.8 m
5CASDL.0018-01 SDL cable - 45-degree connector - 1.8 m
5CASDL.0018-03 SDL flex cable - 1.8 m
5CASDL.0050-00 SDL cable - 5 m
5CASDL.0050-01 SDL cable - 45-degree connector - 5 m
5CASDL.0050-03 SDL flex cable - 5 m
5CASDL.0070-03 SDL flex cable - 7.0 m
5CASDL.0100-00 SDL cable - 10 m
5CASDL.0100-01 SDL cable - 45-degree connector - 10 m
5CASDL.0100-03 SDL flex cable - 10 m
5CASDL.0150-00 SDL cable - 15 m
5CASDL.0150-01 SDL cable - 45-degree connector - 15 m
5CASDL.0150-03 SDL flex cable - 15 m
178
Products with this mark are tested by an accredited test laboratory and certified by
the ACMA. The mark is valid for Australia/Oceania and facilitates the certification of
your machines and systems in this economic area (based on EU conformity).
Products with this certification are certified by the classification society DNV GL and
are suitable for the maritime sector. DNV GL certificates (type approval) are generally
accepted by other classification societies during ship acceptance procedures.
DNV GL per standard DNVGL-CG-0339 from November 2016
IACS E10
EN 60945 section 1c
These products are suitable for the following DNV GL ambient
conditions (DNV GL classes):
Temperature B
Moisture B
Vibration A
EMV B
Housing For onboard installation, the regulations for compliance with the
required degree of protection must be observed.
Products used on a ship's bridge must be dimmable using software in accordance
with the regulations and guidelines from the respective classification society.
Windows 7 operating systems are only permitted to be used as embedded variants.
There are no limitations for all other operating systems approved by B&R.
"Connecting to the end device" on page 170.
Automation Panel 1000 user's manual V2.00
DNV GL
starting
with Rev.
D0
C0
D0
D0
D0
A0
D0
D0
D0
D0
D0
D0
D0
D0
D0
D0
D0
D0
D0
D0