Accessories; General Accessories; Accessories - Order Data; Power Supply Connectors - B&R Automation Panel 1000 User Manual

Accessories

9 Accessories
The following accessories have undergone functional testing by B&R in connection with the device used and can
be operated with this device. Possible limitations regarding operation with individual components other than the
complete system must be taken into account, however. All individual specifications of the components must be
observed when operating the complete system.
All components listed in this manual have undergone intensive system and compatibility testing and been approved
accordingly. B&R cannot assume any functional warranty for accessories that have not been approved.

9.1 General accessories

The following accessories can be ordered for the Automation PC and Panel PC:
• Grounding clip
• Tool set for control cabinet installation (torque wrench with bit set)

9.1.1 Accessories - Order data

Material number Description
5ACCRHMI.0000-000 REP HMI grounding clip
5ACCRHMI.0006-000 REP HMI installation tool for control cabinet

9.2 Power supply connectors

9.2.1 0TB103.9x

9.2.1.1 General information

1-row 3-pin terminal block 0TB103 is used for the power supply.

9.2.1.2 Order data

Model number Short description
Accessories
0TB103.9 Connector 24 VDC - 3-pin female - Screw clamp terminal block
3.31 mm²
0TB103.91 Connector 24 VDC - 3-pin female - Cage clamp terminal block
3.31 mm²

9.2.1.3 Technical data

Information:
The following specified characteristic data, features and limit values are only valid for this accessory
and may differ from those of the complete system. The data specified for the complete system applies
to the complete system in which this accessory is installed, for example.
140
Table 50: 0TB103.9, 0TB103.91 - Order data
Figure
Automation Panel 1000 user's manual V2.00