Table 61: 5CASDL.0018-01, 5CASDL.0050-01, 5CASDL.0100-01, 5CASDL.0150-01 - Technical data
1)
Yes, but applies only if all components installed in the complete system have this certification and the complete system bears the corresponding mark.
2)
Yes, but applies only if all components installed in the complete system have this certification and are listed on the associated DNV GL certificate for the
product family.
9.4.3.1.4 Bend radius specification
Connector - Ferrite bead
9.4.3.1.5 Dimensions
Automation Panel 1000 user's manual V2.00
5CASDL.0018-01
≥5x cable diameter (connector to ferrite bead and ferrite bead to ferrite bead)
Conditionally flexible, applies from ferrite bead to ferrite bead
(tested 100 cycles at 5x cable diameter, 20 cycles/minute)