B&R Automation Panel 1000 User Manual page 162

Accessories
9.4.5.1.6 Cable pinout
If you wish to assemble a suitable cable yourself, the cable must be wired according to this pinout.
Information:
Functionality is only guaranteed for the cables available from B&R.
Cable shield
Pin Pinout
1 TMDS data 2 negative
2 TMDS data 2 positive
3 Shielding TMDS data 2 and SDL
4 SDL negative
5 SDL positive
6 DDC data
7 DDC clock
8 Not connected
9 TMDS data 1 negative
10 TMDS data 1 positive
11 TMDS data 1 and XUSB0 shield
12 XUSB0 negative
9.4.5.1.7 Cable connection
The SDL flex cable with extender must be connected in the correct direction between the B&R industrial PC and
Automation Panel. For this purpose, the signal direction is indicated on the extender unit.
Figure 90: Example for the signal direction of the SDL flex cable with extender
162
DVI (24+1), male
Figure 89: 5CASDL.0xx0-13 - Pinout
Extender unit
Pin Pinout
13 XUSB0 positive
14 +5 V
15 GND
16 Hot plug detection
17 TMDS data 0 negative
18 TMDS data 0 positive
19 Shielding TMDS data 0 and XUSB1
20 XUSB1 negative
21 XUSB1 positive
22 TMDS data shield
23 TMDS clock positive
24 TMDS clock negative
DVI (24+1), male
Cable shield
B&R industrial PC
Automation Panel 1000 user's manual V2.00