Automation Runtime; General Information; Automation Runtime Embedded (Aremb) - B&R Automation Panel 1000 User Manual

Software

7.3 Automation Runtime

7.3.1 General information

The Automation Runtime real-time operating system is an integral part of Automation Studio. This real-time oper-
ating system makes up the software kernel that allows applications to run on a target system.
• Guarantees the highest possible performance for the hardware used
• Runs on all B&R target systems
• Makes the application hardware-independent
• Easy portability of applications between B&R target systems
• Guaranteed determinism through cyclic system
• Configurable jitter tolerance in all task classes
• Support for all relevant programming languages, such as IEC 61131-3 languages and C
• Rich function library per IEC 61131-3 and additionally the extended B&R Automation Library
• Integrated in Automation NET. Access to all networks and bus systems via function calls or by configuration
in Automation Studio™
B&R Automation Runtime is fully embedded in the corresponding target system (hardware on which Automation
Runtime is installed). It thus enables application programs to access I/O systems (also via the fieldbus) and other
devices such as interfaces and networks.

7.3.2 Automation Runtime Embedded (ARemb)

The following software versions (or higher) are required to operate Automation Runtime Embedded with an Au-
tomation Panel 1000:
• Automation Studio V4.0.17.x
° There is support starting from this version exclusively for 5AP1120* single-touch panels.
• Automation Studio V4.1.4.x
° There is support with single-touch functionality starting with this version for single-touch Panel
5AP1120.101E-000.
• Automation Studio V4.2.5 and ARemb upgrade AR M4.10 or AR I4.25
° There is support with single-touch functionality starting with this version for multi-touch panels
5AP1130.0702-000, 5AP1130.101E-000 and 5AP1130.121E-000.
• Automation Studio V4.2.5 and ARemb upgrade AR N4.10 or AR A4.26
° There is support with single-touch functionality starting with this version for multi-touch panels
5AP1130.156C-000 and 5AP1130.185C-000.
Information:
For exact information regarding model numbers and Automation Runtime Windows (ARwin) support,
see the user's manual for the B&R industrial PC being used. This is available in the Downloads section
of the B&R website (www.br-automation.com).
130 Automation Panel 1000 user's manual V2.00