B&R Automation Panel 1000 User Manual page 198

Appendix A
PP100/200/300/400
PP500
10.4" Automation Panel 1000, Automation Panel 900, Panel PC 700 and Power Panel 500 devices are not 100%
compatible with Power Panel 300/400 or Power Panel 100/200 devices in Portrait1 format. Automation Panel 1000,
Automation Panel 900, Panel PC 700 and Power Panel 500 devices need a cutout that is 5 mm larger (bottom
edge).
The larger cutout can be used conditionally for all devices:
• During installation, it is important to ensure that the PP100/200/300/400 devices are positioned and installed
as centrally as possible in the cutout. If this is not the case, the retaining clips can no longer grip and
impermeability is no longer ensured by the circumferential cord gasket (IP65).
198
323 x 358
10
303 x 336
303 x 341
Outer contour of device
Cutout for PP100/200/300/400 device
Cutout for AP900/AP1000/PPC700/PP500 device
Figure 108: Installation compatibility - 10.4" devices - Portrait1
10
8.5
AP900/PPC700
AP1000
13.5 PP100/200/300/400
8.5 AP900, AP1000, PPC700, PP500
Automation Panel 1000 user's manual V2.00