Configuring Windows Ce Proplus Thin Client Automation Runtime (Tcar) - B&R Mobile Panel 40 User Manual

4.1.5 Configuring Windows CE
1. Make sure that you are using a
This Visual Components project must include a VNC server component from the MP40/50 family because
only then can the image content on the B&R
use a handwheel or keys on your thin client, the VNC server in the Visual Components project must support
B&R library "AS_RfbExt".
2. Connect the B&R Windows CE
3. Start the B&R Windows CE device
the red stop button on an MP 40/50.
Note: The hotkey can
4. If the hotkey was recognized, the system will ask for a password after booting. Enter the thin client password.
When delivered, the password is 1234.
Note: The thin client password
5. Open the Start > Settings >
properties of your network card (DHCP, gateway, etc.). Check for correct functionality by pinging, for example.
6. Open up the Start > Settings >
hotkey.
7. Start the program Start > Programs > Accessories > B&R VNC Viewer. Establish a VNC connection to
your Automation Runtime
Note: Regardless of the settings in dialog box "Options", options "Full-screen mode" and "Hide menu bar"
are always enabled in thin client mode.
Information:
For detailed configuration options for the B&R
documentation starting with version 3.30. This
area of the B&R website (www.br-automation.com).
8. Open the Start > Settings >
9. Restart the B&R Windows CE
Mobile Panel 40/50 User's manual V1.80
Figure 58: Control
ProPlus Thin Client
B&R Automation Runtime device
thin client device
and hold the hotkey down while it boots. When delivered, the hotkey is
be changed with the "Thin client" applet in the
can be changed with the Thin client applet in the
Control Panel > Network and
Control Panel > Thin client dialog box and configure the password and
device. Configure the VNC viewer options according to your needs.
Control Panel > Configuration Manager dialog box and save the registry.
device.
Center - Updating / Saving
Automation Runtime
with an installed Visual Components project.
Windows CE thin client
with the B&R Automation Runtime device
Control
dial-up connection dialog box. Configure the
Windows CE VNC Viewer, see the
can be downloaded at no cost from the service
(TCAR)
device be transferred. If you want to
via Ethernet.
Panel.
Control Panel.
Windows CE
Software
help
81