Tool Settings; Additional Information - Nordson ProBlue Flex User Manual

Tool Settings

E 2020 Nordson Corporation
WARNING! Allow only personnel with appropriate training and experience to
operate or service the equipment. The use of untrained or inexperienced
personnel to operate or service the equipment can result in injury, including
death, to themselves and others, and damage to the equipment.
This section of the manual details those tasks typically performed by a
technician.
The following is a list for accomplishing technician‐level tasks:
S
Backing up, Restoring, and Resetting
S
Upgrading the melter software
S
Managing Licenses
S
Viewing System Information
S
Viewing Installed Accessories
S
Viewing and Modifying the System Configuration Code
S
Performing Basic Maintenance

Additional Information

This section presents operating procedures in their most commonly used
form. Procedural variations or special considerations are explained in the
additional information table that follows most procedures. Where applicable,
some table entries also contain cross‐reference information. Additional
information tables are indicated by the symbol shown to the left.
This section includes information and tasks for advanced users, including the
following:
S
Managing melter files (backing up, restoring, uploading)
S
Managing remote recipe inputs
S
Integrating the melter with a PLC
NOTE:
S
When transferring files between the melter and BBconn Cloud, the
USB drive must be formatted using FAT or FAT32. No other format,
such as NTFS and exFAT are supported.
ProBlue Flex OEM User's Guide
85
Part 1129255_01