Setting Up The Melter - Nordson ProBlue Flex User Manual

Setting Up the Melter

Method
S
DASHBOARD | SETUP TOOL | CREATE NEW
Click on the RUNTIME, SYSTEM SETTINGS, COMMUNICATION SETTINGS and
TOOLS links to access additional settings.
S
Optionally, select the RECIPE link to define RUNTIME settings specific to a
production run.
S
BBconn Cloud
When done, DOWNLOAD the .NOR file from BBconn Cloud to your computer and
then copy the .NOR file to the root of a USB drive. Insert the USB drive into the
melter. The melter detects the USB drive, and automatically performs a backup,
then reads the .NOR file and applies the settings, including any RECIPES you may
have created. The rest of this manual details this process in greater detail.
S
When transferring files between the melter and BBconn Cloud, the USB drive must
be formatted using FAT or FAT32. No other format, such as NTFS and exFAT are
supported.
S
You have the option to use BBconn Cloud or you can use the Nordson touch screen
Touch Screen
developed user interface to setup and monitor your melter.
S
At a minimum, you must use the BBconn Cloud application to define the following:
S
Network and PLC communication settings.
S
PLC
Use the PLC Mapping and Interface Setup to create a Flexible Map.
S
Download the appropriate PLC Starter Kit from the BBconn Cloud application
(DASHBOARD | MEDIA CENTER)
E 2020 Nordson Corporation
There are three ways to configure the melter:
The rest of this manual details how to use BBconn Cloud to set up your
melter.
ProBlue Flex OEM User's Guide
Description
27
Part 1129255_01